Epson EasyMP EMP-745 Guide De Mise En Route page 42

2
Select a single port to use in the "Port Configurations" box, and then
click "Apply Now".
Select a single port to use.
Tip :
If you set the "Location", you can select a target location and change all network
settings at the same time.
3
Close the window.
Tip :
Make sure that you only select one port in "Network Port Configurations" and leave all
other ports unselected. If you select more than one port, it may cause the computer to
connect to the wrong network.
Next, proceed to "Connecting the Computer and Projector via the Network".
p.42
41