Computer Wireless Lan Settings; If Using Windows - Epson EasyMP EMP-745 Guide De Mise En Route

Connecting Using Easy Connect Mode (Wireless LAN)
8
Press the [
upper right of the screen, and press the [Enter] button.
The display returns to the EasyMP standby screen. The ESSID that has been set
will be displayed. If "Projector Keyword" has been set to "ON", the projector
keyword will also be displayed.
Tip :
When connecting to a computer, check the projector keyword displayed in the EasyMP
standby screen and enter that keyword. Connection is not possible using a previous
keyword.

Computer Wireless LAN Settings

If Using Windows

This describes how to make the settings for the computer to be connected. The
following settings should be made for wireless LAN communication.
• Ad hoc mode settings
• WEP key settings
The setting methods given on the following pages are for computers that use the
Windows XP operating system. If using an operating system other than Windows
XP, refer to the instructions that are provided with the wireless LAN card for details
on the setting operations.
26
] button to move the cursor to "OK" button displayed in the
The value is displayed here.