Adjusting The Telescopic Arm; Bend Saw Head; Switching On And Off; Checking The Oil Automation - Grizzly AKS 1820 T Lion-Set Traduction De La Notice D'utilisation Originale

Masquer les pouces Voir aussi pour AKS 1820 T Lion-Set:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
telescopic arm after loosening the
hex socket head screw (15a).

Adjusting the Telescopic arm

The telescopic arm (10) can be infinitely
adjusted using quick release (11).
1. Push the lever (11a) forward as
shown in the illustration then
push and pull to adjust the han-
dle length.
2. Pull back the lever (11a) and so
fix the desired working length of
the telescopic arm.
3. If the lever (11a) loosens, tight-
en the Allen screw (11b) using
the wrench (12).

Bend saw head

The saw head can be tilted in 5 positions in
order to be able to cut crooked branches.
Press the release switch (8) and
simultaneously tilt the saw head
(7). It locks into the desired position
when the lock button is released.

Switching On and Off

Ensure that you are standing in a
firm position with both hands grip-
ping the hedge trimmer away from
the body. Ensure that the trimmer
is in contact with no other objects
before switching on.
1. Operate starting lock (
switch on the pruning saw at on/off
switch (
21).
For safety reasons, a lockable contin-
uous operation setting is not possible.
2. The equipment will switch off again
when you release on/off switch (

Checking the oil automation

Before starting work, check the oil level in
the oil automation system
1. Switch the device on and hold it
2. If a trace of oil appears, the device is
3. If no trace of oil appears, clean the oil
4. To clean, wipe the residues from the
20) and
21)
above clear ground. The device
should not touch the ground.
working flawlessly.
outlet channel (
vice repaired by our customer service
department.
oil outlet channel (
brush or a rag.

Working Safelyt

Keep the equipment, cutting attach-
ments and protective blade cover in
good condition in order to prevent
injury.
If dropped, check the equipment for
significant damage or defects.
Observe the specified working angle
60°±10°, in order to guarantee safe
working.
Do not use the cordless pruner when
standing on a ladder or in an unsafe
position.
Do not be tempted to make uncon-
sidered cuts. Doing so may endanger
both yourself and others.
Children must be supervised to en-
sure that they do not play with the
equipment.
Change your working position regu-
larly. Long use of the equipment can
result in vibration-related circulatory
disorders in the hands. However, the
length of use can be extended by us-
ing suitable gloves or taking regular
breaks. Note that a personal tendency
for poor circulation, low outdoor tem-
GB
32) or have the de-
32) using a
63

Publicité

Table des Matières
loading

Table des Matières