Grizzly AKS 1820 T Lion-Set Traduction De La Notice D'utilisation Originale page 55

Power tool use and care:
• Do not force the power tool. Use
the correct power tool for your ap-
plication. The correct power tool will
do the job better and safer at the rate
for which it was designed.
• Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any ad-
just -ments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of start-
ing the power tool accidentaIly.
• Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dan-
gerous in the hands of untrained users.
• Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
• Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations differ-
ent from those intended could result in
a hazardous situation.
• Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Careful handling and use of battery
devices
• Charge the batteries only in chargers
that are recommended by the manu-
facturer. Risk of fire if a charger that is
suitable for a specific type of battery is
used with other batteries.
• In the power tools, use only the
batteries designed for the purpose.
The use of other batteries may result
in injuries and risk of fire.
• Keep the unused battery away
from paper clips, coins, keys, nails,
screws and other small metal ob-
jects, which could cause bridging
of the contacts. A short circuit be-
tween the battery contacts may cause
burns or fire.
• If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental con-
tact, rinse off with water. If the liquid
gets into eyes, seek medical assis-
tance. Leaking battery fluid may cause
skin irritations or burns.
Service:
• Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Special safety directions for battery-
operated tools
• Ensure that the device is switched
off before inserting the battery. In-
serting a battery into a power tool that
GB
55