Charging The Device; Operation; Mounting Wheels; Assembling The Telescopic Arm - Grizzly AGS 720 Lion-Set Traduction De La Notice D'utilisation Originale

GB

Charging the device

1. Remove the safety key (6).
2. Connect the charger cable plug
(21) with the charger socket on
the tool (7).
3. Connect the power supply unit
(22) to a socket.
The charging indicator (1) lights
up:
Red: Equipment charging.
Green: Charging finished.
The recommended charging
time is max. 3 – 5 hours.
4. After the recharging process
is completed, first unplug the
charger from the wall outlet, and
then remove the charger cable
plug from the tool.

Operation

Ensure that the safety key (
is removed before all tasks.

Mounting wheels

1. Use your thumb and index finger
to widen the supplied wheels
(13) and let the axle click into
the slots (28) provided on the left
and right side of the device.

Assembling the telescopic arm

Put both parts of the telescopic arm (18)
together as shown in
Assembling/dismantling the
telescopic arm:
1. Press and hold the release
button (11) Plug the end of the
telescopic tube (17) into the port
provided for this purpose (9) until
126
it locks into place audibly. Let go
of the release button (11).
2, Plug the plug connection (19)
into the charging socket (5) on
the back of the equipment han-
dle (4).
3. To dismantle, release the plug
connection (19). Press the
unlock button (11) and pull the
telescopic arm out of the device
(9).
Adjust the height of the te-
lescopic arm:
4. Adjust the length of the tele-
scopic arm for your size with the
help of the adjusting screw (18).
Adjusting the working angle:
5. Set the desired position by pull-
ing the release switch (20) and
rotating the telescopic arm.
6)
Operation
Keep to noise abatement regula-
tions and other by-laws.

Switching on and off

1. Remove the blade guard before
switching the unit on.
2. Insert the safety key (6) into the
device.
3. To switch on, hold the switch
lock (10) depressed and oper-
ate the on/off switch (8). Then
release the switch lock.
To switch on an off with telesco-
pic arm hold the switch lock (16)
on the handle of the telescopic
arm and simultaneously press
the on/off switch (15). Release
the switch lock, device runs at