Platform. Sudden Tool Slip And Improper Body; Position During Object Removal From The Build; Platform May Result In Personal Injury; Will Result In Improper Object Creation - Dremel 3D40 Traduction De La Notice Originale

BUILDING FROM USB FLASH DRIVE
1. On main menu tap "Build".
2. Tap USB icon to access contents of USB flash
drive.
3. Follow steps 3-7 from Build from On-Printer storage
to complete build from USB flash drive.
USB Flash Drive
BUILD FROM COMPUTER
Dremel 3D40 is compatible with Dremel Digilab 3D
Slicer. Follow the instructions that came with this
software to complete a Build from your computer.
CANCELING YOUR BUILD ON 3D40
To cancel your object during preheating or building, tap
"Stop" on the touch screen. If you confirm "Yes" the
extruder and build platform will move to their calibration
positions.

REMOVING YOUR OBJECT

REMOVING YOUR OBJECT FROM THE BUILD
WARNING
!
OPERATION OR UNTIL IT HAS COOLED DOWN TO AT
LEAST 60°C (140°F). Contact with the extruder tip
during or after operation before tip has cooled may
result in personal injury.
WARNING
!
protective equipment such as heat resistant gloves
and safety glasses will reduce personal injuries.
WARNING
!
TOOLS TO REMOVE OBJECTS FROM THE BUILD

PLATFORM. Sudden tool slip and improper body

position during object removal from the build

platform may result in personal injury.

WARNING
!
may break and result in personal injury.
WARNING
!
REMOVING OBJECTS. Tempered glass plate may
separate from plastic holder and result in personal
injury.
WARNING
!
FIG. 7
OBJECTS. SCRATCHES IN THE BUILD PLATFORM

WILL RESULT IN IMPROPER OBJECT CREATION.

1. Wait for the extruder to cool before removing your
object.
2. With the object still attached, remove build platform
from the build area.
3. Peel your object from the build platform. If needed,
gently use the object removal tool to remove object
from build platform (figure 8). If desired, remove the
build tape from the build platform while separating
the object from the build platform. The build tape
can then be removed from the object.
24
PLATFORM
DO NOT TOUCH THE EXTRUDER
TIP DURING DREMEL 3D40
USE PERSONAL PROTECTIVE
EQUIPMENT. The use of
BE AWARE OF YOUR BODY
POSITION WHEN USING HAND
DO NOT DROP THE BUILD
PLATFORM. Tempered glass plate
DO NOT TWIST OR BEND THE
BUILD PLATFORM WHILE
AVOID SCRATCHING THE BUILD
PLATFORM WHEN REMOVING