EN
+
You will find the illustrations referred to above in the pages 3 – 5 of these
instructions for use.
Scope of delivery
Tank [1] with pump [2], hose [3] with discharge filter [6], shut-off valve [4], instructions
for use [5], carrying strap [7] and spray wand [8], elbow [22], cap nut [9]. (Fig. 1)
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty / Gross weight max. 1.7 / 6.7 kg (3.8 / 14.8 lb) 2.9 / 10,9 kg (6.4 / 24 lb)
Material of tank
Spray wand
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
Assembly
1. Fasten the carrying strap [7] on the tank [1] (Fig. 2)
2. Push the hose [3] with the discharge filter [6] into the tank and secure it with the cap nut
[9]. (Fig. 3)
3. Push the tube [3] into the shut-off valve [4] and secure it with the cap nut [9]. (Fig. 3)
4. Screw the spray wand [8] onto the shut-off valve [4] (Fig. 3)
5. Srew the elbow [22] onto the spray wand [8] (Fig. 3)
Checks
Visual inspection:
wand [8] with elbow [22] and nozzle [16] undamaged? (Figures 1, 3, 18)
+
Pay special attention to the connections between the tank – hose and the hose –
shut-off valve and to the condition of the pump threading and spray wand.
No leaks:
Pump up the empty device to 2 bar (Fig. 10).
► The pressure must not decrease more than 0.5 bar within 30 minutes.
Function:
Pull up the piston pressure gauge [10] (Fig. 4)
► The pressure must dissipate.
Activate the shut-off valve [4] (Fig. 12)
► The shut-off valve must open and close.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
PRIMER 3237P
FIX PLUS 3237FP
Are tank [1], pump [2], hose [3], shut-off valve [4] and spray
15
5 l (1.1 gal)
6.9 l (1.5 gal)
3 bar (43.5 psi)
30 °C (86 °F)
polyethylene
plastic
on the side
< 0.04 l (< 0.01 gal)
1.0 l/min (0.22 gal/min)
< 5 N
ENGLISH
PRIMER 3278P
8 l (1.8 gal)
10 l (2.2 gal)
40 °C (104 °F)