Minebea Intec Midrics 1 MW 1 Mode D'emploi page 83

Issued by NMi Certin B.V.,
designated and notified by the Netherlands to perform tasks with respect to
conformity modules mentioned in Article 13 of Directive 2014/31/EU, after
having established that the measuring instrument meets the applicable
requirements of Directive 2014/31/EU, to:
Manufacturer Minebea Intec Bovenden GmbH & Co. KG
Leinetal 2
D-37120, Bovenden
Germany
Measuring instrument A Non-automatic weighing instrument
Manufacturer's
mark
Type
Further properties are described in the annex:
Description T11379 revision 0.
−
Valid until 6 July 2028
Issuing Authority NMi Certin B.V., Notified Body number 0122
6 July 2018
C. Oosterman
Head Certification Board
NMi Certin B.V. This document is issued under the provision
Hugo de Grootplein 1 that no liability is accepted and that the
3314 EG Dordrecht manufacturer shall indemnify third-party
The Netherlands liability.
T +31 78 6332332
certin@nmi.nl The designation of NMi Certin B.V. as Notified
www.nmi.nl Body can be verified at
http://ec.europa.eu/growth/tools-
databases/nando/
E U - t y p e e x a m i n a t i o n
c e r t i f i c a t e
Number T11379 revision 0
Project number 1902516
Page 1 of 1
: Minebea Intec
: MINECOMB
Reproduction of the complete
document only is permitted.
Certificat
Midrics 1|2 Balances complètes 83