Examples Of Multiple Configurations; Safety Recommendations - Tractel dynafor LLX2 Instructions D'emploi Et D'entretien

7.2 Examples of multiple configurations.

4 sensors linked to one Master
Display Unit and Two Slave Units

7.3 Safety Recommendations

When setting up a multiple configuration, you must physically assemble and
identify all of the components: sensors, Slave display units and Master display
unit before starting to link them.
This operation is essential if you are to avoid an improbable, but possible,
confusion with a component that does not belong in the set up.
4 sensors linked to one Display Unit
25
GB