Detailed Description; Icons - Tractel dynafor LLX2 Instructions D'emploi Et D'entretien

6.2.1.3 Standard screen in "Limited" mode
X
In this manual, this number refers to the position of the screen in the block diagram at the end of the manual.

6.2.2 Detailed description

In « full access » mode, display all the icons by pressing one of the
GB

6.2.3 Icons

Menu access
icon
Positive or
negative value
stress indicator
Tare Function
access icon
a) Active icons:
Menu access icon: offers access to advanced functions (See chapter 6.3).
Units access icon: enables measurement unit selection (See section 6.2.4.3).
Tare Function access icon: enables Tare function (Gross / Net Load) (See section 6.2.4.4).
Peak Stress access icon: enables the maximum stress save function (See section 6.2.4.5).
Display unit data access icon: shows display unit power pack charge and data relating to the display
Transmission data access icon: enables viewing and modification of the radio network status (see
Identification access icon: enables viewing of network equipment identification (see section 6.3.2.3).
Sensor data access icon: Shows sensor battery charge and data relating to the sensor (See section
b) Indicator Icons:
Alarm Indicators: appear if one or more safety thresholds have been set, flashing if exceeded.
Printer indicators: not used in this version.
Filter indicators: appears if one of the dynamic effect filters is activated. This indicator takes priority
Action
No action
ESC
No action
Navigate between
functions. Units, Tare
and Max.
Navigate between
functions. Units, Tare
and Max.
Filter and Alarm
Unit access
indicators
icon
Peak stress
access icon
unit (See section 6.3.2.2).
section 6.3.2.4).
6.3.2.1).
over the printer icon.
Standard display in "Limited" mode:
Following the welcome screen, the
standard screen automatically appears.
The sensor/display unit assembly is
ready for use in "Limited" mode.
Only the Units, Tare and Max functions
are accessible (See § 6.2.4.3/4/5).
Battery level and display
unit data access icon
Battery level and
ISensor data
access icon
14
Comments
or buttons.
Network
transmission data
access icon
Stress
value
Identification
access icon