Definition And Pictograms - Tractel dynafor LLX2 Instructions D'emploi Et D'entretien

DEFINITIONS AND PICTOGRAMS
Definitions:
The following terms are used in this manual:
"Product": Equipment element or assembly defined on the cover page, delivered complete in
its standard version, or as one of the various models described.
"Installation": Comprehensive set of operations required to place a complete product in a
condition ready for commissioning (or connection to other components for
commissioning), starting from the state in which the product has been delivered.
"User": Person or department in charge of management and safe use of the product
described in the manual.
"Technician": Qualified person in charge of the maintenance operations described and authorised
to the user by the manual ; the technician is understood to be skilled and familiar
with the product.
"Operator": Person or department using the product in compliance with the purpose for which it
is intended.
"Sensor": LLX2 or LLXh sensor, or any other load cell implementing a strain gauge associated
to an LLXt module, thus becoming a component of an "LLX2 System".
"LLX2 System": Any force measuring system using LLX2 technology.
Pictograms used in this manual:
«DANGER»: Remarks intended to prevent fatal, serious or minor injury to personnel or
«IMPORTANT»: Remarks intended to prevent a failure or damage to the product, but not
«NOTE»: Remarks concerning precautions to be taken to ensure easy, efficient installation,
use and maintenance.
You must read the user and maintenance manual.
damage to the environment.
directly endangering the life or health of the operator or any other person, or
damage to the environment.
5
GB