Elementary Functions And Corresponding Displays; Standard Display; Navigating Between Icons; Measurement Unit Selection - Tractel dynafor LLX2 Instructions D'emploi Et D'entretien

6.2.4 Elementary functions and corresponding displays

6.2.4.1 Standard display

Display
1

6.2.4.2 Navigating between icons

2

6.2.4.3 Measurement unit selection

3

6.2.4.4 Tare Function

4
Action
No action
ESC
No action
Select an icon
Select an icon
Confirm current selection
ESC
Return to standard display
Move clockwise from icon to
icon
Move anti-clockwise from icon
to icon
Confirm selection
Return to standard display
ESC
without modification
Select an icon and enable the
available options
Select an icon and enable the
available options
Confirm TARE option when it
is highlighted.
Return to standard display
ESC
without modification
Select an icon and enable the
available options
Select an icon and enable the
available options
15
Comments
Standard Display:
Sensor stress.
Measurement units.
Dynamic effect filtering, see
advanced functions § 6.3.1.2.4.
Display unit power pack level
Sensor battery level.
Radio reception level.
Navigation:
By pressing on either of the two
arrows, all available functions
are displayed.
Move from icon to icon using
the arrows.
Select Unit: daN, kN, kg, t,
Lbs, Ton.
Select the unit icon, which starts
flashing.
Confirm with
Enable the various unit symbols:
Confirm with
For 100 t and 250 t use : kN, t,
Ton
TARE Function:
Select the TARE icon, which
starts flashing.
Confirm with
Enable the various options.
Confirm with
TARE = Initialise a new Tare
RAW = Sum of NET + TARE
NET = Difference between RAW - TARE
GB