Technical Data - HASE ASMARA Manuel D'utilisation

12. Technical Data

The ASMARA, certified in compliance with DIN-EN 13240 and Art. 15 a B-VG (Aus-
tria), can only be operated when the fire box is closed. Conforms with the DIBt
(Deutschen Institut für Bautechnik/German Institute for Building Technology) ap-
proval criteria for direct vent fireplaces for solid fuels. Multiple connections to the
chimney are possible, see point 4. "Connection of Multiple Devices in Direct Vent
Operation".
DIBt approval number: Z-43.12-378 / Typ FC41x und FC51x
The following data applies to the chimney characteristics in accordance with EN
13384-1 / 2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output
Efficiency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on 20 bis 80 m² (subject to change).
Dimensions: Height
Stove 156 cm
Fire box 49 cm
Weight without heat retaining block (Ceramic=Natural stone)
Wood
6 kW
6 kW
231 ˚C
279 ˚C
6,3 g/s
12 Pa
81,9 %
≤ 1250 mg/Nm³
≤ 40 mg/Nm³
≤ 120 mg/Nm³
≤ 200 mg/Nm³
25 m³/h
Width Depth
41 cm 44 cm
25 cm 27 cm
202 kg
Heat retaining block (optional)
¹Vertical flue pipe length
Flue pipe diameter
Pipe diameter of HASE ventilation system**
Front view
Ceramic/Natural stone:
41
Top view
Ceramic/Natural stone:
* Test bench performance and values at 13% O
2
** For separate air supply in low-energy houses and insufficient combustion air supply in the room
where the stove is installed.
67 kg
min. 33 cm
15 cm
10cm
Side view
Ceramic/Natural stone:
en
20
Inst. of Hase air system
below
Dimensions in cm
37