Technical Data - HASE Lima Manuel D'utilisation

13. Technical Data

The Lima C.16 / Sila, certifi ed in compliance with DIN-EN 13240 and Art. 15 a
B-VG (Austria), can only be operated when the fi re box is closed. Conforms with
the DIBt (Deutschen Institut für Bautechnik/German Institute for Building Technol-
ogy) approval criteria for direct vent fi replaces for solid fuels. Multiple connections
to the chimney are possible, see point 4. "Connection of Multiple Devices in Direct
Vent Operation". DIBt approval number: Z-43.12-396 (FC 61x)
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Effi ciency
Particulate
OGC
NO
X
CO content at 13% O
2
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output**
Min. required combustion air volume
* Test bench performance and values
** The additional supply pressure required for the combustion air connection with the Hase Air System:
behind= 3 Pa
Depending on the insulation of the building, the nominal thermal output of 6 kW
indicated on 20 - 80 m² (subject to change).
Dimensions:
Stove
Fire box
44
Height Width
126 cm 47 cm
40 cm 31 cm
Weight Lima C.16 (ceramic/soapstone)
Weight Sila (steel ceramic/soapstone)
Weight 1x heat retaining block
¹Vertical fl ue pipe length
Flue pipe diameter
Pipe diameter of Hase ventilation system***
Front view Lima C.16 / Sila:
Wood
6 kW
6,4 kW
256 ˚C
81 %
16 mg/Nm³
59 mg/Nm³
104 mg/Nm³
1000 mg/Nm³
5,6 g/s
308 ˚C
12 Pa
25 m³/h
Top view Lima C.16 / Sila:
Depth
47 cm
*** For separate air supply in low-energy houses and insuffi cient combustion air supply in the room
28 cm
where the stove is installed.
Side view Lima C.16 / Sila:
47
195/220 kg
140/180/200 kg
82 kg
min. 30 cm
15 cm
10 cm
13,5 Inst. of Hase air
system below
Dimensions in cm