Yamaha Motor GRIZZLY YFM600FWA N Manuel Du Propriétaire page 76

1. On command four-wheel drive switch "2WD/4WD"
1. Contacteur de commande du mode de traction
"2WD/4WD"
1. Interruptor de modo de tracción "2WD/4WD"
On command
"2WD/4WD"
To change from two-wheel drive (2WD) to
four-wheel drive (4WD), stop the ATV and set
the switch to the 4WD position.
To change from four-wheel drive (4WD) to
two-wheel drive (2WD), stop the ATV and set
the switch to the 2WD position.
WARNING
Always stop the ATV before changing from
2WD to 4WD or from 4WD to 2WD. The ATV
handles differently in 2WD than in 4WD in
some circumstances. Changing from 2WD to
4WD or vice-versa while moving may cause
the ATV to unexpectedly handle differently.
This could distract the operator and increase
the risk of losing control and an accident.
4-17
four-wheel drive
EBU00061
switch