emerio DF-107090 Mode D'emploi page 3

8. This product can only be used according to its rated
information printed on the rating label.
9. Make sure the national voltage supply is in compliance
with the rating label information. If you have any doubt
about the way of operating the product or you are not
sure about the compliance of the ratings with the national
power
electrician/service centre.
10. The socket must be designed that the attached plug will
fit into it.
11. This product is for indoor use only! It is not suitable for
outdoor use.
12. Please prevent the product to be exposed to excessive
dirt and humidity.
13. Any other way of operating the product, except the
described one, will lead to dangers such as short circuit,
fire or else. It is not allowed to modify this product in any
way and the housing has not to be opened, otherwise the
product will not be any longer in compliance with its
safety class.
14. Never connect or disconnect the plug with wet hands.
15. Never unplug the plug by pulling the power supply cord.
Always pull the plug itself.
16. During installation/cleaning, please pay attention that the
power supply cord will not be squeezed or damaged.
17. Always disconnect the appliance from the mains and
allow the product to cool down to room temperature:
before storing away the appliance; before cleaning or
maintenance; after use; if you are not going to use it for a
long period of time.
18. Clean the product itself with a slightly damp cloth.
19. Never replace a damaged power supply cord by yourself.
In such case, or in case of malfunction, contact an
authorized electrician/service centre for examination,
repair or adjustment because special tools are required.
supply please contact an authorized