emerio DF-107090 Mode D'emploi page 26

DF-107090
BEFORE USE
First read all instructions before use and retain for later reference. Only plug this appliance into an earthed
socket.
Before first use, remove the packing materials; tear down the protection films in the lid and outer case (Pls.
pay attention to environment protection!). Then, wash the accessories and the inner pan in warm water. Dry
them well before use. Make sure that the electrical parts remain dry. The deep fryer is equipped with an
adjustable thermostat and indicator lamps. The "open" frying system ensures excellent professional results
and easy cleaning.
HOW TO OPPERATE THE DEEP FRYER
To fix the handle to the basket, press the ends together and insert the ends into the two rounds in the basket.
Press the handle on the rectangular metal part of the basket. Make sure you have the correct grip for the big
or small basket.

Never switch on the deep fryer without oil or fat, as this could damage the machine. Also, do not place
any other liquids such as water or other substances in the pan.

Place the deep fryer on a dry, stable surface.

Since the deep fryer becomes hot during use, make sure that it is not too close to other objects.

Remove the lid from the deep fryer and take out the accessories.

Fill the deep fryer with the desired amount of oil or liquid fat. Only liquid fat can be used in this type of
deep fryer. Make sure that it is filled not less than minimum level and not higher than the maximum level
as indicated on the inside of the appliance. For best results, we recommend that you do not mix different
kinds of oil together.

Connect the power plug to a suitable outlet; the red indicator light illuminates.

Set the thermostat to the required temperature setting, which is suitable for what you are frying. Consult
the temperature table.

The temperature control light shows green. The oil fat is heated to the required temperature within 10 to
13 minutes.

Use the handle to place the basket in the deep fryer.

Place the food to be deep-fried into the basket. For best result, put dry food into the basket.

Lower the basket into the oil slowly to prevent excessive bubbling. Always remember to put the lid back
on the deep fryer after lowering the baskets into the fat.

The indicator light will go out when the temperature you have selected has been reached. Always wait
until the selected temperature has been reached. To keep the oil at the selected temperature, the
thermostat repeatedly goes on and off, and the indicator light as well.

Raise the basket again when the frying time has elapsed.

After frying let the product drip dry, never shake the basket.

Set the thermostat to the lowest level (turn the thermostat fully anticlockwise.)

Remove the plug from the outlet.

Rinse the handle and the basket after use, and dry thoroughly.

Once the deep fryer has completely cooled off, you can replace the basket in the appliance and store it.
Store the deep fryer, with the lid close, in a dark, dry place. In this way, you can leave the oil and the
basket in the deep fryer when storing.
EN