Multi-Section Cooking - Pelgrim MAG537RVS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation

Multi-section cooking

At most 2 sections can be set for cooking. In multi-section cooking, if
one section is defrosting, the item that needs to be defrosted must be
placed in the first section.
Example
You want to defrost food for 5 minutes, and after that 7 minutes of 80%
microwave power to cook.
1. Press button 'ONTDOOIEN' twice.
The display shows 'dEF2'.
2. Turn the control knob until '5:00' appears in the display.
3. Press button 'MAGNETRON'.
In the display 'P 100' will blink.
4. Press (several times) button 'MAGNETRON' or turn the control knob
until 'P 80' appears in the display.
5. Press start button 'START' to confirm the setting.
The power is set to 'P 80'.
6. Turn the control knob until '5:00' appears in the display.
7. Press start button 'START' to start cooking.
A beep is heard and the defrosting begins. The defrosting time in the
display counts down. If the first section is finished, there will be a beep
again and the second section begins. If the second section is finished,
there will be five beeps.
Programme set in advance
1. Set the clock first (see page 33).
2. Input the cooking programme. Two stages can be set at most.
Defrosting should always be set as the first stage, if it is included in
the multi-level programme.
Attention: do NOT press the start button 'START' after setting the
cooking programme.
3. Press button 'KLOK'.
In the display the hour figure will flash.
4. Turn the control knob to set the hours.
5. Press button 'KLOK' again.
In the display the minute figure will flash.
6. Turn the control knob to set the minutes.
7. Press the start button 'START' to confirm the setting.
If the door is closed and the programmed time arrives, the buzzer will
ring twice and the cooking will start automatically.
EN 11

Publicité

Table des Matières
loading

Table des Matières