Setting The Clock; Cooking/Heating With Time And Power Level Setting - Pelgrim MAG 550 Notice D'utilisation

GB

SETTING THE CLOCK

The microwave is fitted with a 24 hour
clock.As soon as you plug in the
socket the display will show "0:00".
The colon between the hours and the
minutes will flash. The clock will always
show the current time, except when
the oven is in use. To set the clock:
1. Press button
2. Press the numerical buttons to set
the time, e.g. "4:35". The display will
show "4:35".
3. Press button , the display will
show the right time and the colon
":" will flash continuously.
If there is a power cut or if the plug is
removed from the socket the time
setting will be deleted. Once the
power supply is restored the display
will show "0:00" again ans the time
will have to reset. If you wish to see
the time while the oven is in use press
button . The correct time will be
visible for 3 seconds.
COOKING/HEATING with time
and power level setting
1. Press button , on the display
the microwave indicator light will
go on and " :0" will show.
2. Press the numerical buttons for the
required cooking time, e.g. 10
minutes. Before the colon the
display will show the minutes and
behind the colon the seconds will
be shown: "10:00". The cooking
time can be set up to 99 minutes
and 99 seconds. I fyou wish to
select full power (level 10) you can
omit steps 3 and 4 and go on with
step 5.
3. Press button , the display will
show "P-10".
4. Press the numerical buttons for the
required power level, e.g. level 6,
the display will show "P- 6".
5. Press button . The oven light will
go on and the oven will operate for
10 minutes at power level 6. The
microwave indicator light will flash
and the display will show the
resulting cooking time.
6. At the end of the cooking time
three beeps will sound. The micro-
wave oven stops and the oven
light will go off. The turntable stops
turning and normal time reappears
at the display.
NL