Machine Storage; Service And Repair; Threading Oil; Disposal - RIDGID 600-I Mode D'emploi

600-I/690-I Power Drives
600-I and 690-I Power Drive Accessories
Catalog
No. Description
45923 602 Support Arm
45928 692 Support Arm
46668 600-I Carrying Case
46673 690-I Carrying Case
10883 418 Oiler with 1 Gallon Nu-Clear Oil
16703 425 1 / " - 2 1 / " TRISTAND Vise
8 2
36273 460-6 1 / " - 6" TRISTAND Vise
8
Further information on accessories specific to the tool
can be found in the RIDGID Catalog and online at
RIDGID.com

Machine Storage

Power Drives must be kept indoors or
WARNING
well covered in rainy weather. Store the machine in a
locked area that is out of reach of children and people
unfamiliar with the machines. These machines can cause
serious injury in the hands of untrained users.

Service and Repair

WARNING
Improper service or repair can make machine
unsafe to operate.
The "Maintenance Instructions" will take care of most of
the service needs of this machine. Any problems not
addressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Author ized Independent
Service Center or returned to the factory.
For information on your nearest RIDGID Author ized Inde -
pendent Service Center or any service or repair questions:
• Contact your local RIDGID
• Visit RIDGID.com to find your local RIDGID contact
point.
• Contact Ridge Tool Technical Service Department at
rtctechservices@emerson.com or in the U.S. and
Canada call (800) 519-3456.
12
® distributor.

Threading Oil

For information concerning RIDGID
use and handling, refer to the labels on the container
and Material Safety Data Sheet (MSDS). MSDS is avail-
able at RIDGID.com or by contacting Ridge Tool Techni -
cal Service Department at (800) 519-3456 in U.S. and
Canada or rtctechservices@emerson.com.

Disposal

Parts of the Power Drives contain valuable materials and
can be recycled. There are companies that specialize in
recycling that may be found locally. Dispose of the com-
ponents in compliance with all applicable regulations.
Contact your local waste management authority for more
information.
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2012/19/ -
EU for Waste Electrical and Electronic Equip -
ment and its implemen tation into national
legislation, electrical equipment that is no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
® Thread Cutting Oil
999-999-476.09_REV. F