Optional Equipment; Thread Cutting Oil Information; Machine Storage; Service And Repair - RIDGID 1224 Mode D'emploi

optional equipment

To reduce the risk of serious injury, only use equip-
ment specifically designed and recommended for
use with the 1224 Threading Machine.
Catalog Model
No. No,
26212 764
26217 744
34577 –
26187 –
Die Heads
26132 711
26142 713
26152 714
26137 911
26147 913
26157 914
26162 541
26167 542
55447 725
57497 –
57507 –
57492 –
57502 –
55452 766
58712 –
Stands
92457 100A
92462 150A
92467 200A
22563 –
Nipple Chucks
51005 819
68160 819
34157 419
34162 419
34167 419
34172 419
34177 419
34182 419

Thread Cutting oil Information

Read and follow all instructions on the threading oil
label and Safety Data Sheet (SDS).
1.800.561.8187
940-713-030.10_REV. G
WARNING
Description
¼" to 4" Wheel-Type Cutter
¼" to 4" Blade-Type Reamer
¼" to 4" Reamer Blade
Jaw Insert and Roll Set for PE-Coated Pipe
Universal Self-Opening R.H., NPT
Universal Quick-Opening L.H., NPT
Receding Self-Opening R.H., NPT
Universal Self-Opening R.H., BSPT
Universal Quick-Opening L.H., BSPT
Receding Self-Opening R.H., BSPT
Quick-Opening Bolt L.H./R.H. (¼" to 1" sizes)
Quick-Opening Bolt L.H./R.H. (1 1 / " to 2 " sizes)
8
Cut-Grooving Die Head
2 1 / " to 3 1 / " Grooving Die Set
2 2
2 1 / " to 3 1 / " Grooving Bit only
2 2
4" Grooving Die Set
4" Grooving Bit only
Blade Type Cutter
Cut-Off Tool Bit (for 766)
Universal Leg & Tray Stand
Universal Wheel & Tray Stand
Universal Wheel & Cabinet Stand
Steel Cabinet
Nipple Chuck 1 / " to 2" NPT
2
Nipple Chuck 1 / " to 2" BSPT
2
Nipple Chuck 2 1 / " NPT
2
Nipple Chuck 3" NPT
Nipple Chuck 4" NPT
Nipple Chuck 2 1 / " BSPT
2
Nipple Chuck 3" BSPT
Nipple Chuck 4" BSPT
www.
1224 Threading Machine

Machine Storage

The Threading Machine must be kept
WARNING
indoors or well covered in rainy weather. Store the machine
in a locked area that is out of reach of children and people
unfamiliar with threading machines. This machine can
cause serious injury in the hands of untrained users.

Service And Repair

Improper service or repair can make machine
unsafe to operate.
The Maintenance Instructions will take care of most of the
service needs of this machine. Any problems not ad -
dressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Independent Service
Center or returned to the factory. Only use RIDGID service
parts.

disposal

Parts of the Threading Machine contain valuable mate-
rials and can be recycled. There are companies that
specialize in recycling that may be found locally. Dispose
of the components and any waste oil in compliance with
all applicable regulations. Contact your local waste man-
agement authority for more information.
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2012/ -
19/EU for Waste Electrical and Electronic
Equipment and its implementation into nation-
al legislation, electrical equipment that is no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
information@itm.com
.com
WARNING
19