Malfuctioning,Cause And Cure; Safety Thermostat Recharge - OEM DOMITOR DM Mode D'emploi

DOMITOR DM/DB
Functioning
5.6 -

MALFUCTIONING,CAUSE AND CURE

- The oven does not start:
• Verify the electric connection.
• Make sure the cutout switch is on.
• Contact manufacturer's technical service.
- Pizza is not baked, uniformly:
• The baking surface is dirt: clean the baking surface
• The baking surface is damaged: replace the surfa-
ce
• Adjust the oven temperature
• Check the hood extraction
- Oven malfunctioning:
• The set temperature is not reached:
Reistances are damaged
Make sure the electric oven connection has properly
been carried out
Contact manufacturer's technical service.
DANGER
For all other troubles, do not hesitate to contact
manufacturer's technical service
5.7 -

SAFETY THERMOSTAT RECHARGE

(Fig 4)
This operation shall be carried out by manufacturer's
technical service after eliminating the trouble.
The safety thermostat recharge shall manually be carried
out as follows:
Disconnect the knife switch placed in the upper
machine side, eliminate the cause of the thermostat
intervention.
Remove the right-hand panel (1).
Press the red push-button (2) on the safety thermostat,
then reassemble all by proceeding in the opposite
way.
DANGER
DANGER
FIG. 4
2
1
GB - 21