Reception Of The Machine; Unpacking - OEM DOMITOR DM Mode D'emploi

2.3 - RECEPTION OF THE MACHINE

Upon reception of the machine make sure that the packing
is complete and not damaged. Should the packing be
complete, remove it as specify at point 2.4 (aside from
different manufacturer's instructions).
Check if the instruction booklet is inside the packing
as well as the components specifi ed in the transport
documentation.
In case any damage or defect is found:
a- Inform immediately the transport company and your
agent, both by phone and by registered letter with
return receipt;
b- Manufacturer shall also be informed.
The oven consists of three distinct parts: support, cover
or hood.
Eeach part is packed, separately; on installation, the
components are assembled.
2.4 - UNPACKING (Fig. 3)
To remove the oven from its packing, proceed as
follows:
• Cut the straps (1) that tie up the carton.
• Open the carton (2), by removing the metallic clips.
• Remove the cardboard packaging (2).
• Check if everything is complete.
• Open the oven door (3), remove the refractory ma-
terial fastening carton and the loose components, as
well.
• Check if the delivery is complying with the PACKING
LIST.
DANGER
The packing elements ( plastic bags, carton, nails,
etc...) shall be kept away from the reach of the chil-
dren, since they are potential danger sources, so,
they shall be gathered and sent to special centres
to correctly be recycled.
A message concerning possible damages, troubles
or a non-compliance in comparison with the
description in our packing list shall timely occur,
anyway it shall latest occur within 8 days from the
receipt of the oven. Otherwise, the goods will be
considered as accepted.
GB - 10
IMPORTANT
IMPORTANT
DOMITOR DM/DB
Technical data - Transport and unpacking
FIG. 3