Oven Preparation; Oven Starting - OEM DOMITOR DM Mode D'emploi

DOMITOR DM/DB
Functioning

5.2 - OVEN PREPARATION

Pizza can be baked either directly on the refractory oven
surface or in the baking-tin.
Here below you can fi nd some instructions to adjust the
different parameters.
When you are going to start the oven, do not adjust cei-
ling and bedplate resistances at their maximum capacity,
since the oven temperature would in such a case be 50°
- 60° C higher than the set one and pizzas will burn.
5.2.a - Oven starting (Fig. 2)
Turn the selector switch (1) onto ON, the lamp (2)
•
as well as the lamp (3) and (4) of both bedplate and
crown plate resistances light up.
Make sure the rotary knob (5) and (6) of bedplate and
•
crown plate resistances are on the wished tempera-
ture value.
Wait until the temperature inside the oven reaches
•
the set value, this occurs when the lamp (3) and (4)
go out and the thermometer (7) indicates that the set
temperature is reached.
IMPORTANT
FIG. 2
GB - 19