Pizza Baking; Self-Cleaning Cycle; Cutting Off - OEM DOMITOR DM Mode D'emploi

5.3 - PIZZA BAKING

• As soon as the set temperature value is reached, open
the access door and insert the pizza to be baked.
ATTENTION
Inside the oven, temperature is very high, therefore
suitable individual protection means shall be used
to insert and remove the pizza; RISK OF BURNS.
• Start the extractor hood by pressing the relevant
switch.
• While baking, it is possible to modify temperature by
operating the relevant rotary knobs as explained in the
preceding paragraphs.
• Once the pizza is baked, open the oven access door
and remove the baked pizza.
5.4 - SELF-CLEANING CYCLE (Fig 3)
The self-cleaning cycle shall be carried out after
•
using the oven for several hours, at the end of each
working day, before turning off the oven.
By operating the knob (1) and (2), the crown plate &
•
bedplate resistance temperature value shall be set
on 400°C.
Leave the oven on for approximately 20 minutes with
•
this temperature value, then turn it off and let it get
cool.
• In the event the extractor hood is functioning, let
it function for the time needed to carry out a self-
cleaning cycle.

5.5 - CUTTING OFF

• At the end of each working day, turn off the oven by
rotating the selector switch (3) onto OFF;
the lamp (4) goes out.
GB - 20
DOMITOR DM/DB
Functioning
FIG. 3