D - D Door Spring Replacement - OEM DOMITOR DM Mode D'emploi

DOMITOR DM/DB
Maintenance
6.1.d.d - Door spring replacement (Fig 6)
This operation shall be carried out by skilled tech-
nicians.
• Remove the right-hand panel (1) by unscrewing the
relevant screws.
• Remove the control board (2) by unscrewing the
relevant screws.
• Release the spring (3) and replace it.
• Insert the spring (3) in the pin (4), turn the spring
rewinding it up, then fasten the spring catch (5) in
the milling (6) of the pin (4).
• Reassemble the panel (1) and (2).
DANGER
FIG. 6
GB - 25