Identification Of Components; Identifying The Machine; Fitting The Wheels / Feet - OEM FA121M Mode D'emploi Pour L'utilisateur

3

6. IDENTIFICATION OF COMPONENTS

1. Head
2. Control dashboard
3. Guard
4. Tank
5. Base
6. Electrical wire
7. Spiral
8. Adjustable wheels or feet
9. Machine plate
7. IDENTIFYING THE MACHINE ( FIG. 3 )
The machine number and identification data are stamped on a machine plate (9) fitted to the base of the machine.
For any request for technical support and orders for spare parts always quote the machine number and
model.
8. FITTING THE WHEELS / FEET ( FIG. 4 )
For transport purposes, according to the model, machines are sent with wheels or feet disassembled. To fit them:
Wheels
Lift the machine as described above.
Screw the wheels (1) onto the base, fully tightening. The brake wheels should be fitted at the front of the machine.
Feet
Lift the machine as described above.
Screw the feet (2) onto the base, make sure the machine is level and tighten the nut (3).
6
DOUGH
FIG. 3
9
kW
Ali SpA
Viale Lombardia, 33
A
BOZZOLO ( MN )
Type
Nr.
3
7
5
FA121M - FA121
FA181M - FA181 - FA182
FA251 - FA252 - FA 38 - FA382
INSTALLATION
1
Volt.
Hz.
2
4
8
3 0.0 46/3
FIG. 4