Refrigerator Shelves; Temperature Controlled Deli Drawer - Jennair W11490758B Guide D'utilisation

CARE AND CLEANING
5. Place the cap (removed in Step 2) on the
new filter. Align the ridge on the cap with
the arrow on the filter. Turn the cap
clockwise until it snaps into place.
A
A. Eject button
B. Arrow on filter
C. Ridge on cap
6.
Push the new filter into the opening in
the base grille. As the filter is inserted, the
eject button will depress. The eject button
will pop back out when the filter is fully
engaged.
7. Pull gently on the cap to check that the
filter is securely in place.
8. Flush the water system. Depending on your
model, see "Water and Ice Dispensers" or
"Ice Maker and Storage Bin."

REFRIGERATOR SHELVES

Important information to know about glass
shelves and covers:
Do not clean glass shelves or covers with warm
water when they are cold. Shelves and covers may
break if exposed to sudden temperature changes
B or impact, such as bumping. Tempered glass is
designed to shatter into many small, pebble-size
C
pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them
to avoid dropping.
The shelves in your refrigerator are adjustable
to meet your individual storage needs.
Storing similar food items together in your
refrigerator and adjusting the shelves to fit
different heights of items will make finding the
exact item you want easier. It will also reduce
the amount of time the refrigerator door is
open and help save energy.
SHELVES AND SHELF FRAMES
To remove and replace a shelf/frame:
1. Remove the shelf by tilting it up at the front
and lifting it out of the shelf supports. Pull
shelf straight out.
2.
Reposition the shelf supports in the desired
location. Check that they are level and
firmly inserted in the support rails.
3. Place the back of the shelf in the shelf
supports.
4. Lower the front of the shelf and make sure
that it is in position.
TEMPERATURE CONTROLLED DELI
DRAWER
The control for the deli drawer adjusts the
temperature of the drawer. Cold air flows into
the drawer through the air duct between the
freezer and the refrigerator. Adjusting the
control allows more or less cold air through the
air duct.
ADJUST THE TEMPERATURE (DISPENSER
MODELS)
1. Choose a setting based on the item to be
stored in the pan.
2. Push the button that corresponds to that
setting.
3. The indicator light for that setting will
illuminate to verify that the pan is ready to
be loaded.
A
A. Crisper
B. Deli drawer
CARE AND CLEANING | 19
B
A