Vacation Care; Refrigerator Shelves - Jennair W10728796B Guide D'utilisation

CARE AND CLEANING

VACATION CARE

1.
Remove all food from the refrigerator.
2.
If your refrigerator has an automatic ice
maker:
Turn off the water supply to the ice
maker at least one day ahead of time.
When the last load of ice drops, slide
the ice maker control to the OFF
(down) position.
3.
Under the Fridge or Freezer menu, press
and hold COOLING OFF for 3 seconds to
turn off cooling.
NOTE: To turn off the power completely, use
the power ON/OFF switch located behind
the top grille. Refer "Power On/Off Switch."
4.
Clean refrigerator, wipe it, and dry well.
5.
Tape rubber or wood blocks to the tops of
all doors to prop them open far enough for
air to get in. This stops odor and mold from
building up.

REFRIGERATOR SHELVES

Important information to know about glass
shelves and covers:
Do not clean glass shelves or covers with warm
water when they are cold. Shelves and covers
may break if exposed to sudden temperature
changes or impact, such as bumping.
Tempered glass is designed to shatter into many
small, pebble-sized pieces. This is normal. Glass
shelves and covers are heavy. Use both hands
when removing them to avoid dropping.
The shelves in your refrigerator are adjustable
to meet your individual storage needs.
Storing similar food items together in your
refrigerator and adjusting the shelves to fit
different heights of items will make finding the
exact item you want easier. It will also reduce
the amount of time the refrigerator door is
open, and save energy.
SHELVES AND SHELF FRAMES
To remove and replace the shelf/frame:
1.
Remove the shelf by tilting it up at the front
and lifting it out of the shelf supports. Pull
shelf straight out.
2.
Reposition the shelf supports in the desired
location. Check that they are level and
firmly inserted in the support rails.
3.
Place the back of the shelf in the shelf
supports.
4.
Lower the front of the shelf and make sure
that it is in position.
CARE AND CLEANING | 21