Care And Cleaning; Ice Maker And Storage Bin; (On Some Models - Accessory) - Jennair W11490758B Guide D'utilisation

CARE AND CLEANING

ICE MAKER AND STORAGE BIN

(ON SOME MODELS - ACCESSORY)

IMPORTANT: Flush the water system before
turning on the ice maker. See "Water and Ice
Dispensers." Allow 24 hours to produce the first
batch of ice. Discard the first three batches of
ice produced. Allow 3 days to completely fill the
ice container.
STYLE 1
To Turn the Ice Maker On/Off:
The On/Off switch for the ice maker is a wire
shutoff arm located on the side of the ice
maker.
1. To turn the ice maker on, simply lower the
wire shutoff arm.
NOTE: Your ice maker has an automatic
shutoff. As ice is made, the ice cubes will fill
the ice storage bin and the ice cubes will
raise the wire shutoff arm to the OFF (arm
up) position.
2. To manually turn the ice maker off, lift the
wire shutoff arm to the OFF (arm up)
position, and listen for the click to make
sure the ice maker will not continue to
operate.
TO REMOVE AND REPLACE THE ICE BIN:
1. Flip up the covering panel.
A
A. Ice maker cover
2.
Lift the wire shutoff arm so it clicks into the
OFF (up) position. Ice can still be dispensed,
but no more can be made.
3. Lift up the front of the storage bin and pull
the ice bin forward.
4. Replace the bin by pushing it in all the way
or the dispenser will not work. Push the
wire shutoff arm down to the ON position
to restart ice production. Make sure the
door is closed tightly.
TO REMOVE AND REPLACE THE ICE STORAGE
BIN:
1. Hold the base of the storage bin with both
hands and press the release button to lift
the storage bin up and out.
NOTE: It is not necessary to turn the ice
maker control to the OFF (right) position
when removing the storage bin. The sensor
cover ("flipper door") on the left wall of the
freezer stops the ice maker from producing
ice if the door is open or the storage bin is
removed.
2.
Replace the storage bin on the door and
push down to make sure it is securely in
place.
CARE AND CLEANING | 17