Safe Handling - Afriso EURO-INDEX ÖWWG 3 Notice Technique

Safety
2.3

Safe handling

DANGER
WARNING
NOTICE
6
•
Liquids which tend to become highly viscous or lead to aggluti-
nations or deposits
•
Liquids with a flash point of < 55 °C
•
Hazardous area (Ex)
If the product is operated in hazardous areas, sparks may cause
deflagrations, fires or explosions.
•
Damp, humid, wet rooms
•
Unprotected drip pans installed outdoor
•
Applications involving persons and animals
This product represents state-of-the-art technology and is made ac-
cording to the pertinent safety regulations. Each product is subjected
to a function and safety test prior to shipping.
 Operate the product only when it is in perfect condition. Always
observe the operating instructions, all pertinent local and na-
tional directives and guidelines as well as the applicable safety
regulations and directives concerning the prevention of acci-
dents.
Severe burns or death caused by mains voltage (AC 230 V,
50 Hz) in the control unit.
 Do not expose the control unit to water.

Disconnect the mains voltage supply before opening the control
unit or before performing maintenance and cleaning work and
make sure it cannot be switched on by accident.
 Do not tamper with the control unit in any way whatsoever.
Severe burns, explosions, deflagrations or fires caused by tem-
peratures of up to 100 °C at the probe tip.
 Never touch the probe tip.
Extreme ambient conditions may have an adverse effect on the
device.
 Protect the product from humidity.
 Protect the product from atmospheric influences and direct sun-
light.
– English –
ÖWWG 3