Intended Use; Predictable Incorrect Application; Safe Handling; Staff Qualification - Afriso EURO-INDEX KSG Notice Technique

1 Safety
1.1

Intended use

1.2

Predictable incorrect application

1.3

Safe handling

1.4

Staff qualification

KSG
The boiler safety group assembly KSG may only be used for the fol-
lowing applications:
•
In sealed heating systems as per EN 12828
•
For heat generators with a heating capacity of up to 50 kW or up
to 100 kW, depending on the version
The boiler safety group assembly KSG may only be used for the fol-
lowing media:
•
Water
•
Water/glycol mixtures
Any use other than the application explicitly permitted in this instruc-
tion manual is not permitted.
The boiler safety group assembly KSG must never be used in the fol-
lowing cases:
•
Operation when the discharge opening is shut off
•
Use with adherent, corrosive or flammable fluids
•
Operation with media that have an adverse effect on the proper
operation of the boiler safety group KSG
•
Temperatures in excess of or below the permissible tempera-
tures and pressures, see table 1, page 9
The boiler safety group assembly KSG represents state-of-the-art
technology and is made according to the pertinent safety regulations.
Each device is subjected to a function and safety test prior to ship-
ping.
 Operate the boiler safety group assembly KSG only when it is in
perfect condition. Always observe the operating instructions, all
pertinent local and national directives and guidelines as well as
the applicable safety regulations and directives concerning the
prevention of accidents.
The product may only be mounted, commissioned, operated, main-
tained, decommissioned and disposed of by qualified, specially
trained staff.
– English – Safety
7