2.4
Qualification of personnel
2.5
Personal protective equipment
2.6
Modifications to the product
ÖWWG 3
Only appropriately trained persons who are familiar with and under-
stand the contents of these operating instructions and all other perti-
nent product documentation are authorized to mount, commission,
maintain and decommission this product.
These persons must have sufficient technical training, knowledge
and experience and be able to foresee and detect potential hazards
that may be caused by using the product.
All persons working on and with the product must be fully familiar
with all directives, standards and safety regulations that must be ob-
served for performing such work.
In the case of fuel oil consuming systems
•
Compliance with all directives, standards and safety regulations
concerning handling of water-polluting substances as applicable
at the installation site of the product.
•
In Germany: Certification as per § 62 "Verordnung über Anlagen
zum Umgang mit wassergefährdenden Stoffen" (AwSV) (Ordi-
nance on Installations for Handling Water-Polluting Sub-
stances).
Always wear the required personal protective equipment. When per-
forming work on and with the product, take into account that hazards
may be present at the installation site which do not directly result
from the product itself.
Only perform work on and with the product which is explicitly de-
scribed in these operating instructions. Do not make any modifica-
tions to the product which are not described in these operating in-
structions.
– English –
Safety
7