Commissioning The Product; Establishing A Wireless Connection (Enocean® Products Only) - Afriso EURO-INDEX ÖWWG 3 Notice Technique

Mounting and commissioning
6.5

Commissioning the product

6.6 Establishing a wireless connection (EnOcean® products
only)
DANGER
22

The product has been properly mounted and electrically con-
nected.
1. Apply voltage via the on-site mains fuse.

The green and the red LED light up and the audible alarm
sounds.

If no alarm condition is present, ÖWWG 3 automatically unlocks
after approx. 8 seconds. The red LED goes out and the audible
alarm is switched off.
2. Perform a function test (see chapter 6.6, page 22).
See the operating instructions of the AFRISOhome gateway or the
app for detailed information on establishing a wireless connection.

ÖWWG 3 is in the vicinity of the AFRISOhome gateway.

The AFRISOhome gateway is in "Learn" mode.
1. Open the control unit.
2. Switch on the mains voltage.
Severe burns or death caused by mains voltage (AC 230 V,
50 Hz) in the control unit.
 Do not touch live parts.
3. Briefly press the "LRNTEL" at ÖWWG 3.
 ÖWWG 3 sends a Learn telegram (LRNTEL).

ÖWWG 3 is now connected to the AFRISOhome gateway.
– English –
ÖWWG 3