Faults; Fault Table - Pelgrim GKT814 Notice D'utilisation

FAULTS

Fault table

Symptom
There is a smell of gas close
to the appliance.
A burner won't ignite.
If you are unsure about whether your gas hob is working properly, this
does not necessarily mean that there's a problem. In each case check
the following points in the table below or for more information visit the
web site 'www.pelgrimservice.nl'.
Possible cause
The gas connection to the
gas hob is leaking.
Plug not in socket.
Faulty fuse / fuse in consumer
unit has tripped.
Spark plug dirty/damp.
Burner parts incorrectly fitted.
Burner parts dirty/moist.
Main gas tap shut off.
Fault in the gas network.
Gas bottle or tank is empty.
Wrong type of gas used.
Solution
Shut off the main gas tap.
Contact your installer.
Plug the plug into the
mains socket.
Fit a new fuse or reset the
fuse.
Clean / dry the spark plug.
Assemble the burner parts
using centring bosses.
Clean / dry the burner parts.
Check to see whether the
outflow holes are open.
Open the main gas tap.
Check with your gas supplier.
Connect a new gas bottle or
have the tank filled.
Check that the gas used is
suitable for the appliance. If
not, contact your gas fitter.
GB 17