Function Description; Technical Data - Grizzly EKS 2440 QT Traduction De La Notice D'utilisation Originale

Function description

The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail)
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various
protection fittings for the protection of the
user.
Refer to the following descriptions for the
function of control elements.

Technical Data

Electrical chainsaw .......... EKS 2440 QT
Rated input voltage......230-240 V~, 50 Hz
Input power ................................... 2400 W
Safety class .......................................
Protection category ........................... IP20
Chain speed ................................... 14 m/s
Weight
(without guide rail and chain)........... 4.7 kg
Weight (with guide rail and chain) ... 5.5 kg
Oiltank ............................................140 ml
Chain .............................Oregon 91P057X
Chrome cutting teeth, low-kickback
Chain bar ...Oregon 160SDEA041 (112364)
Chain link separation ......................10 mm
Chain width ....................................1.3 mm
Teeth of the sprocket chain wheel ...........7
Length of the chain bar .................460 mm
Sawing length ...............................395 mm
Acoustic pressure level
(L ) .................93.0 dB(A); K
pA
Sound power level (L
measured ..... 103.5 dB(A); K
guaranteed ................................ 106 dB (A)
Vibration (a ) .............7,5 m/s
n
=3 dB(A)
pA
)
WA
=2.5 dB(A)
WA
; K=1.5 m/s
2
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
/ II Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
2
GB
161