Technical Data - Grizzly AHS 1845 T Lion Traduction De La Notice D'utilisation Originale

GB
• Return the unit to a recycling centre.
The plastics and metals in the unit can
be sorted and appropriately recycled.
Ask our Service Centre for details.
• Dispose of batteries in discharged
condition. We recommend covering
the pole with adhesive tape to prevent
a short circuit. Do not open up the bat-
tery.
• Dispose of batteries in accordance
with the local regulations. Take batter-
ies to an old battery collection point
where they will be recycled in an
environmentally friendly manner. For
information about this, ask your local
waste management company or our
service centre.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.

Technical Data

Appliance
Motor voltage ................. 18 V
Blade speed ................ 1300 min
Weight (without battery
and charger) ....................... approx. 4 kg
Blade length ..............................450 mm
Cutting length ........................... 410 mm
Cutting capacity...........................15 mm
Sound pressure level
(L ) ...................... 87 dB(A), K
pA
Sound power level (L
guaranteed..........................100 dB(A)
measured ..... 96.7 dB(A); K
Vibration (a )..............3.0 m/s
n
Battery (Li-Ion) ........... MOCA-V18-1.5Ah
Nominal voltage ........................ 18 V
Capacity .......................................1.5 Ah
Charging time ....................approx. 3-5 h
34
1,5 Ah
(rpm)
-1
=3 dB(A)
pA
)
wA
=3 dB(A)
wA
, K=1.5 m/s
2
Recharger ......................DKYC2200400G
Nominal consumption.................... 12 W
Voltage input ...100-240 V~50/60 Hz, 0.3 A
Voltage output .................. 22 V
Protection class ...............................
Protection category ........................ IPX0
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may differ
during actual use of the power tool from
the stated value depending on the manner
in which the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
2
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
0.4 A
II