General Notes On Safety; General Safety Instructions For Power Tools - Grizzly AHS 1845 T Lion Traduction De La Notice D'utilisation Originale

GB
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.

General Notes on Safety

Before working with the equipment,
familiarise yourself with all operat-
ing components. Practice handling
the equipment and have the func-
tion, operation and working methods
explained to you by an experienced
user or specialist. Ensure that you
can shut off the equipment immedi-
ately in an emergency. Inappropriate
use of the device may result in seri-
ous injury.
If an accident or fault occurs during
operation, immediately switch off the
device and disconnect at the plug.
Treat injuries appropriately or consult
a doctor. For the correction of faults,
read the "Troubleshooting" chapter or
contact our service centre.
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions. Omissions
in the compliance with safety direc-
tions and instructions can cause
electrical shock, fire and/or severe
injuries.
24
Retain all safety directions and instruc-
tions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated
power tools (with power cord) and to bat-
tery-operated power tools (without power
cord).
Work area safety
Keep work area clean and well lit.
•
Cluttered or dark areas invite acci-
dents.
Do not operate power tools in ex-
•
plosive atmospheres, such as in
the presence of flammable Iiquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep children and bystanders away
•
while operating a power tool. Dis-
tractions can cause you to lose con-
trol.
Electrical safety
• Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and match-
ing outlets will reduce risk of electric
shock
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
• Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use
the cord for carrying, pulling or un-