The illustration how to handle the ap-
pliance can be found on page 2.
Overview
1 Strike guard
2 Safety knife bar
3 Hand protection
4 Safety switch
5 Front handle
6 Ventilation slots
7 On/Off switch
8 Rear handle
9 Battery (sold separately)
10 Battery release buttons
11 Battery charge state indicator
12 Battery charger
(sold separately)
13 Knife guard
14 Guide track
15 Button
Function Description
The cordless hedge trimmer features
a laser-cut knife of special-grade steel.
When trimming, the cutting teeth move to
and fro in a linear shearing motion. The
strike guard at the tip of the knife prevents
unpleasant kickback reactions when hit-
ting walls, fences, etc. Operators are pro-
tected by the appliance's two-hand safety
switch and quick-stop brake function.
The hand protection guards your hands
against twigs and branches.
Read the sections below to learn more
about each operating element's function.
Technical Data
Appliance
Motor voltage ............................ 18 V
Idling speed ................. 1300 min
Runtime .............................max. 50 min*
Cutting length ............................520 mm
Cutting capacity...........................15 mm
Weight (without battery charger) .. 2.7 kg
Sound pressure level
(L
) ................... 77.5 dB(A), K
pA
Sound power level (L
guaranteed............................93 dB(A)
measured ... 91 dB(A); K
Vibration (a
) ..........................................
n
Rear handle ...........................0.970 m/s
Front handle ..........................1.964 m/s
Battery (Li-Ion)
Nominal voltage ........................ 18 V
Capacity .......................................1.5 Ah
Charging time .......................approx. 5 h
Recharger ..................... JLH082100350B
Nominal consumption.................... 12 W
Voltage input ........... 100-240V~50/60Hz
Voltage output ................ 21V
Protection class ...............................
Protection category ........................ IP20
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
GB
(rpm)
-1
=3 dB(A)
pA
)
wA
=2.09 dB(A)
wA
K=1.5 m/s
350mA
21
2
2
2
II