Technical Data; Guarantee - Grizzly EHS 550 T Traduction De La Notice D'utilisation Originale

GB
Ask our Service Centre for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.

Technical Data

Telescopic Handled
EHS 550 T
Input voltage rating ......230-240V~, 50 Hz
Input power .....................................550 W
Blade speed............................. 1500 min
Safety class .......................................
Degree of protection
Weight .......................................... 3.95 kg
Length of blades .......................... 530 mm
Cutting length .............................. 450 mm
Cutting capacity ............................. 20 mm
Acoustic pressure level
(L ) ........87.25 dB(A); K
pA
Sound power level (L
measured .. 100 dB(A); K
guaranteed .............................102 dB(A)
Vibration (a )
n
at the handle ........................ 2.246 m/s
at the additional handle ........ 4.576 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
28
Hedge Trimmer
.........................IP 20
= 2.16 dB(A)
pA
)
wA
= 2.16 dB(A)
wA
K=1,5 m/s
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may differ
during actual use of the power tool from
the stated value depending on the manner
in which the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
-1
II (all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).

Guarantee

• This appliance has a 24-month guar-
antee. Commercial use will invalidate
the guarantee.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
2
from the guarantee. Certain compo-
2
nents are subject to normal wear and
2
tear and are excluded from the guar-
antee. These include in particular: cut-
ter bars, eccentric drives and carbon
brushes.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
This requires that the appliance is
returned to to the dealer undismantled
and with proof of purchase and guar-
antee.