Menu Selection Keys; Leds Functions; Boiler Status; User Mode - BOREAL HYDROBOREAL-14 Instructions D'installation, D'utilisation Et D'entretien

9.2.

MENU SELECTION KEYS

9.3.

LEDS FUNCTIONS

The second page of the main screen shows the operation of the LEDs. You must move with the swipe horizontally to the left to access the LED display:
9.4.

BOILER STATUS

With the boiler running, pushing only once the key P6 in the display, we can access to the next menu which provides technical information of the boiler
status.
Display
T. Smoke [°C] 183
T. Boiler [°C] 61
T. DHW [°C 52
Air flow 191
Fan [rpm] 1600
Pressure [mbar] 1500
Endless screw axle 2.0
Service [h] 1200
Working hours [h]
Switching on 2.0
Product code 562 1004
9.5.

USER MODE

Below is a description of the display in normal operation depending on the
available functions.
9.5.1.

BOILER SWITCH ON

To switch on the boiler we have to push the key P2 during three seconds. First the
boiler will make an initial "check up" and then the lighting process will start; we will
see the message "Ignition"
The time of lighting process is several minutes. If after this time the flame is not
present the boiler will automatically show the alarm "Er12"
Button Performance description
P1 Exit menu or submenu
On/Off (press 3 seconds)
P2 Reset errors (press 3 seconds)
Activate/deactivate chrono
Enter user menu 1
P3
Enter user menu 2 (press 3 seconds)
Saving data
P4 Modifies (increases) the menu value
P5 Activate chrono time zone
P6 Modifies (decreases) the menu value
LED Function
1 Ignitor ON
2 Auger ON
3 Pump ON
4 3-ways valve ON
5
Not used in this boiler
6
Not used in this boiler
7
Not used in this boiler
8 Not used in this boiler
9 Chrono ON
10 Not used in this boiler
11 Ambient thermostat reached
12 Sanitary water demand
Description
Boiler smoke temperature
Boiler water temperature
DHW tank temperature
Air flow speed
Smoke extractor revolutions
Boiler operating pressure (water pressure)
Endless screw axle activation time
Hours until maintenance notification
Boiler working hours in Normal state
Endless screw axle activation time
Item code (internal code that has no value for the user)
P1
IGNITION
P2
P3
EN
P4
P5
P6
39