Fronius XCharge professional Instructions De Service page 76

No. 37: Conservation charge current too high
Remedy:
-
No. 51: Secondary temperature outside permissible range
Remedy:
-
No. 52: Current regulator faulty
Remedy:
-
No. 53: External temperature sensor faulty
Remedy:
-
Contact After-Sales Service in the event of the following charging errors (no. 60 onwards):
No. 60: Device fault - invalid characteristic number
No. 61: Device fault - invalid characteristic block
No. 62: Device fault - Incorrect checksum of calibration values
No. 63: Device fault - Incorrect device type
76
Check for parallel consumers (GPS etc.)
Contact after-sales service
Contact after-sales service
Replace external temperature sensor
No. 38: Battery has not reached the requi-
red voltage (15.8 V) during initial charging
Remedy:
- Set correct Ah range for the battery
- Fill the battery completely with acid
- Replace battery if it is faulty
No. 50: Device output fuse faulty
Remedy:
- Contact after-sales service