Operating Modes; General Information; Available Operating Modes; Selecting The Operating Mode - Fronius XCharge professional Instructions De Service

Operating modes

General informa-
tion
The charger is ideally suited to charging 12 V lead batteries, as well as preselected 12 V
lithium batteries as per the "Permitted lithium batteries" section of the "Technical data"
chapter.
Available operat- The following operating modes are available:
ing modes -
-
-
-
-
-
Selecting the op-
1
erating mode

Pb Charge mode

WARNING! Charging batteries in the wrong operating mode can lead to serious
injury and damage. The selected operating mode remains active even after dis-
connecting the device from the mains or in the event of a power failure. Therefore,
the correct operating mode must be set when changing the type of battery.
Pb Charge (for 12 V lead batteries)
Li-Ion Charge (for 12 V lithium batteries)
Backup Mode (for 12 V lead and lithium batteries)
Pb Refresh (for 12 V lead batteries)
Pb Initial Charging (for 12 V lead batteries)
Device options
Connect mains cable to charger and plug into mains
Select other operating modes using the up/down keys
2
The charger is on standby - Pb Charge
mode is displayed.
Use Pb Charge mode for 12 V lead batte-
ries for:
- Charging or conservation charging
with the battery either fitted or removed
59