Abus TVAC19000A Notice D'utilisation page 46

English
WiFi Setting
In the Wi-Fi settings you can select the network to be used for
the internet access by the camera.
When selecting the menu item, all the networks located in the
area are shown. Select your network and enter your own Wi-
Fi password.
To prevent access by unauthorised persons, protect your
network by encryption with WPA/WPA2/WPA2-PSK.
Once the settings are saved, the camera starts up again. Do
not forget to disconnect the Ethernet adapter cable (if used
during the initial setup).
If the connection was not successful or incorrect Wi-Fi
information was entered, press the reset button for 5 seconds
to restore the camera to the factory settings.
46