Operation And Configuration Via App - Abus TVAC19000C Notice D'utilisation

6. Operation and configuration via app

With the TVAC19000 WLAN pan/tilt camera and app, you can gain live access to the camera and
configure it. The app for this device can be found in the App Store/Google Playstore under the
name "App2Cam".
To configure access to the camera, proceed as follows:
①
Set-up – preparation
Download the "App2Cam" app and install it on your
smartphone.
Check that your smartphone or tablet is connected to
the Internet.
There are two ways to connect the camera to the
network:
Option 1: (Wireless set-up)
Connect the enclosed power supply unit to the camera.
Do not start setting up the camera until the power LED
lights up continuously. This may take around 60
seconds.
Option 2: (Wired set-up)
Connect the enclosed LAN cable to the camera. Next,
connect the cable to your router.
Then connect the enclosed power supply unit.
Do not start to set up the camera via the app until the
power LED lights up continuously. This may take
around 60 seconds.
14
English