Electrical; Network; Cybersecurity; Video - Videotec Série 2 Manuel D'instructions

16.2.3 Electrical

Supply voltage/Current consumption:
• 230Vac ±10%, 0.5A max, 50/60Hz
• 120Vac ±10%, 1A max, 50/60Hz
• 24Vac ±10%, 5A max, 50/60Hz
Power consumption:
• 120W max
• 30W, P&T static, heating switched off

16.2.4 Network

RJ45 port
• Ethernet connection: 10BASE-T/100BASE-T
Slot SFP (SMALL FORM FACTOR PLUGGABLE)
• Ethernet connection:100BASE-FX
• Supply voltage: 3.3V
• Standard: compliant MSA
The SFP module (not supplied by VIDEOTEC) must
meet the following requirements:
• Laser: Class 1, complies with EN60825-1
• Certification: UL/IEC 60950-1 or UL/IEC 62368-1

16.2.5 Cybersecurity

Digitally signed firmware
Password restricted access (HTTP digest)
Support of various user access levels
Control of accesses IEEE 802.1X
HTTPS cryptography using TLS1.0, TLS1.1, TLS1.2 and
TLS1.3
Centralised certificate management
Complies with ONVIF Security Service specifications
30

16.2.6 Video

Video encoder
• Communication protocol: ONVIF, Profile Q, Profile
S and Profile T, ONVIF Thermal Service
• Device configuration: TCP/IPv4-IPv6, UDP/IPv4-
IPv6, HTTP, HTTPS, NTP, DHCP, WSDISCOVERY,
DSCP, IGMP (Multicast), SOAP, DNS
• Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP,
Multicast
• Video compression: H.264/AVC, MJPEG, JPEG,
MPEG4
• 3 independent video streams
• Image resolution: from 320x180pixel up to
720x480pixel in 4 steps
• Selectable frame rate from 1 to 30 images per
second (fps)
• Web Server
• Directional OSD (maximum 4 settable areas)
• Motion Detection
• QoS: Differentiated DSCPs for streaming and
device management
• SNMP and NTCIP protocols

16.2.7 I/O interface

I/O alarm board:
• Alarm inputs: 1
• Relay outputs: 1+1 (1 relay reserved for washer
pump and one configurable, 1A, 30Vac/60Vdc
max)
Input for remote reset: 1
MNVCNXPTZ2_2032_EN