Installation; Range Of Use; Methods Of Installation - Videotec Série 2 Manuel D'instructions

7 Installation

CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
Before starting any operation, make sure
the power supply is disconnected.
At start up the system makes some
automatic calibration movements: do not
stand near the device when it is powered.
VIDEOTEC strongly recommend to test the
device configuration and performance
before putting it in the final installation
site.
The product is equipped with a multicore
cable that allows connections to be made.

7.1 Range of use

Installation temperature: from -40°C (-40°F) up to
+65°C (149°F).
Operating temperature: from -40°C (-40°F) up to
+65°C (149°F).
18

7.2 Methods of installation

The system can be installed only in a standard or
inverted position (ceiling mount). When installed
for inverted operation, the camera orientation and
controller functions are reconfigured for normal
operation through the system's software.
Hardware adjustment is not required for inverted
operation.
Fig. 13
MNVCNXPTZ2_2032_EN