Identification; Product Description And Type Designation; Product Marking; Checking The Markings - Videotec Série 2 Manuel D'instructions

4 Identification

4.1 Product description and type
designation
PTZ single or dual camera for marine onshore/
offshore or industrial applications.
The NXPTZ SERIES2 is resistant to rust and corrosion
and does not require maintenance thanks to the
absolute precision of the construction process and
the solid AISI 316L stainless steel construction with
mirco-shot and electropolished surfaces.
10

4.2 Product marking

The product has a label applied in
compliance with CE marking.
Fig. 1
The label shows:
• Model identification code.
• Supply voltage (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Protection degree (IP).
• Serial number.

4.2.1 Checking the markings

Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.
For more information regarding versions and
product coding, please consult the relative chapter (5
Versions, page 11).
MNVCNXPTZ2_2032_EN