EINHELL BG-SC 2240 P Mode D'emploi D'origine page 17

Anleitung BG_SC_2240_P_SPK7:_
4. Intended use
The equipment is designed for scarifying lawned
areas. The scarifying process is designed for ripping
moss and weeds - complete with their roots - out of
the soil and for loosening the soil. As a result your
lawn can absorb nutrients better and is cleaned. We
recommend you to scarify your lawn in the spring
(April) and autumn (October).
Important! Due to the high risk of bodily injury to the
user, the equipment may not be used to grind up
branch or hedge clippings. Moreover, the equipment
may not be used as a power cultivator to level out
high areas such as mole hills.
For safety reasons, the equipment may not be used
as a drive unit for other work tools or tool sets of any
kind.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Engine type:
Displacement
Max. engine output
Working speed
Fuel:
Tank capacity:
Engine oil:
Spark plug:
Blades (number)
Blade diameter
Depth setting
Working width:
L sound pressure level
pA
K uncertainty
L sound power level
WA
K uncertainty
29.06.2010 8:10 Uhr
Vibration a
K uncertainty
Weight:
Residual risks
Even if you use this equipment in accordance to
instructions, certain residual risks cannot be
eliminated. The following hazards may arise in
connection with the equipment's construction
and layout:
1. Damage to hearing if no suitable ear protection is
applied.
2. Health damage caused by hand-arm vibrations if
the equipment is used over a longer period or is
not properly guided and maintained.
Warning! The equipment generates an
electromagnetic field during operation. Under certain
circumstances this field may actively or passively
impede medical implants. To reduce the risk of
serious or fatal injuries, we recommend persons with
medical implants to consult their doctor and the
manufacturer of the medical implant prior to using the
equipment.
6. Before starting the equipment
The equipment is delivered unassembled. The grass
basket and the complete push bar must be
assembled and mounted before using the equipment.
Follow the operating instructions step-by-step and
use the pictures provided as a visual guide to easily
1 cylinder, 4-stroke
assemble the equipment.
118 cc
Fitting the bottom push bar (Fig. 3)
2.2 kW / 3 hp
Fit the bottom push bar (Fig. 3 / Item 3) to the push
3,600 rpm
bar holder using the screws (Fig. 3 / Item 9) and nuts
Unleaded petrol
(Fig. 3 / Item 10) supplied.
approx. 2.5 l
Important! The push bar can be adjusted to two
approx. 0.4 l / 10W30
different heights. To do so select either the top or the
LD F7TC
bottom position of the oval hole.
18
Fitting the top push bar holder (Fig. 4)
163 mm
Position the upper push bar (Fig. 4 / Item 2) such that
-15 - +5 mm
its holes line up with the holes of the lower bar. Screw
400 mm
the tubes together, using the screws (Fig. 4 / Item 12)
81 dB(A)
and nuts (Fig. 4 / Item 8) supplied. Use the supplied
cable clips (Fig. 4 / Item 11) to secure the throttle
3 dB
cable and the engine Start / Stop cable to the lower
93.4 dB(A)
push bar.
3 dB
Seite 17
3.492 m/s
hw
GB
2
1.5 m/s 2
31 kg
17