Filling The Coolant - Sherco 125 SE/R Manuel Du Propriétaire

FILLING THE COOLANT

- Remove the bleed screw
gasket
- Pour the coolant into the radiator through
the cap
2
Coolant
Radiator bleed
screw
- Continue filling.
- Fill until the coolant reaches the level
(approximately 1.1 liters)
- Put the bike on the side stand and follow
the rest of the filling procedure (
2
.
1
Minerva Perma Universal
D 4 -25°C
M6X70
using a new
8Nm
p.93)
☛
95